Irrigation Equipment Directory

Drip Irrigation System Basics

A drip system moves water from the source through a pump, filter, pressure control and mainlines to emitters at the plants. Parts must work in a set order.

Why it matters

Drip applies small amounts of water exactly where roots are, with high efficiency. It also fails quietly when filters clog or pressure drifts, so understanding the layout is the first step to running it well.

Step by step

  1. Start at the source and pump, then place the filter and any injection point ahead of the main valves.
  2. Add pressure regulation and flow measurement, so each zone runs at the design pressure.
  3. Run mainlines and submains to zone valves, then connect laterals, tape or tubing along each crop row.
  4. Calculate flow for each zone from row length, emitter flow and spacing, and match it to supply.
  5. Flush lines, check pressure at the start and end of each zone, and note any dry spots.

What good looks like

A good drip system delivers even flow at all emitters, with clean filters, steady pressure and no leaks. Plants show uniform growth along each row with no dry spots.

Worked example

Illustrative: rows 5 feet apart give 43,560 divided by 5, or 8,712 feet of row per acre. If tape delivers 0.4 gpm per 100 feet, an acre needs 87.12 times 0.4, about 34.8 gpm. A 5 acre block needs about 174 gpm.

Common mistakes to avoid

  • Placing the filter after the zone valves instead of before.
  • Skipping pressure regulation and letting emitters see too much pressure.
  • Designing zones larger than the pump can supply.
  • Never checking end-of-row flow, where problems show first.

Safety, legal and compliance notes

Chemical injection and backflow protection are regulated to protect water supplies. Use approved backflow devices, follow label directions on any injected materials and consult your local water agency or extension office.

What to record

Keep a dated equipment file: purchase date and cost, model and serial numbers, nozzle and sprinkler package charts, pump curves, inspection and repair history, parts replaced, flow and pressure readings and energy use. Good records help you plan replacements, prove performance and support warranty or insurance claims.

When to ask for help

Electrical, well, backflow and chemigation rules vary by state and utility. Talk with the equipment manufacturer or dealer, your extension irrigation specialist, your NRCS or conservation district office, a licensed electrician and your electric utility before you install, modify or repair major equipment. The state directory lists agencies and resources in every state.

Frequently asked questions

Why must the filter come first?

Emitters have tiny openings, and particles from the source plug them. Filters protect everything downstream of the pump.

Is drip good for all crops?

It suits row crops, vines, orchards and vegetables well. Closely planted grains and some pasture crops often favor other systems.

How do I know a zone is balanced?

Compare pressure at the start and end of laterals. Large differences mean uneven flow, and need larger pipe or shorter runs.

Related guides

More from the network

Farm news, humor and ranch life at farm.FM.