Irrigation Equipment Directory

Pivot Sprinkler Package Basics

A sprinkler package is the set of heads, nozzles, regulators and drops along the pivot. Each outlet must pass more flow toward the outside, because it waters more ground.

Why it matters

The package controls uniformity, runoff risk and energy use. Wrong nozzles, worn parts or a mismatched package leave dry and wet bands, and a poor choice can waste pressure that your pump pays for.

Step by step

  1. Note package type, head height and spacing, and whether pressure regulators are installed at each outlet.
  2. Get the nozzle chart listing sizes and positions, and confirm it matches the installed flow and pressure.
  3. Calculate required flow per foot at each distance from the pivot point, using the system flow and length.
  4. Compare calculated flow per outlet with the nozzle rating at your operating pressure.
  5. Replace worn nozzles and failed regulators, and record the change on the chart.

What good looks like

A good package delivers flow that rises in proportion to distance from the pivot, even spray with no plugged nozzles, and constant pressure at each outlet, with a chart that matches what is installed.

Worked example

Illustrative: system 800 gpm over 1,320 feet. Flow per foot at distance r is 2 times 800 times r divided by 1,320 squared. At 1,000 feet it is 0.918 gpm per foot, so a 10 foot spacing needs 9.18 gpm. At 500 feet it needs 4.59 gpm. Flow doubles with distance.

Common mistakes to avoid

  • Mixing nozzle sizes in place without updating the chart.
  • Running with failed regulators and assuming pressure is even.
  • Using a chart from a different system length or flow.
  • Ignoring worn orifices that spray more water than they should.

Safety, legal and compliance notes

Replacing parts on a live pivot is hazardous. Lock out power and release pressure first, and consult a qualified irrigation dealer before changing the package type or operating pressure.

What to record

Keep a dated equipment file: purchase date and cost, model and serial numbers, nozzle and sprinkler package charts, pump curves, inspection and repair history, parts replaced, flow and pressure readings and energy use. Good records help you plan replacements, prove performance and support warranty or insurance claims.

When to ask for help

Electrical, well, backflow and chemigation rules vary by state and utility. Talk with the equipment manufacturer or dealer, your extension irrigation specialist, your NRCS or conservation district office, a licensed electrician and your electric utility before you install, modify or repair major equipment. The state directory lists agencies and resources in every state.

Frequently asked questions

Why do nozzles get bigger toward the end?

The outer spans cover more area per foot of pipe, so each outlet needs more flow to apply the same depth.

What does a pressure regulator do?

It holds outlet pressure steady despite elevation changes and friction, so each nozzle delivers its rated flow.

How often should nozzles be replaced?

When wear shows in a flow or catch test. Worn nozzles pass extra water, and the pattern usually degrades before you notice by eye.

Related guides

More from the network

Farm news, humor and ranch life at farm.FM.