Pivot Annual Inspection Checklist
Use this checklist once a year, before the first irrigation. It lists each pivot component to check, what to record and what action to take, so nothing gets skipped.
Why it matters
Small faults found in spring cost an hour to fix, but the same faults found in July cost yield. A written checklist builds a record you can compare year to year, which shows slow wear before failure.
Step by step
- Make columns for item, condition, measurement, action needed, date fixed and initials, and print one sheet for each pivot.
- Inspect structure: pipe, truss rods, couplers, span joints, tower legs and base bolts for cracks, rust and loose hardware.
- Inspect drives: gearbox oil, tires and pressures, wheel lugs, motors, alignment switches and the control panel.
- Inspect water side: leaks, gaskets, nozzles, regulators, drains, end gun and pressure at the pivot point.
- Run a full circle, time it, and compare time and pressure with last year's sheet.
What good looks like
A good checklist ends with every row filled, a short repair list with dates, and measurements such as pressure and circle time that match last year or have an explained change.
Worked example
Sample row: Tower 4 gearbox, oil low, add oil, fixed on the date, initials. Sample calculation: design pressure 60 psi, measured 52 psi at the pivot point. The drop is 8 psi, or 8 over 60, which is 13.3 percent, so check pump wear, leaks or a partly closed valve.
Common mistakes to avoid
- Filling the sheet from memory instead of inspecting each item.
- Skipping the timed circle that reveals slow or stalled towers.
- Not keeping last year's sheet for comparison.
- Fixing problems without recording them, so patterns go unnoticed.
Safety, legal and compliance notes
Lock out and tag the power before climbing or working on any pivot component. Have a licensed electrician service panels and wiring, and follow manufacturer guidance for structural repairs.
What to record
Keep a dated equipment file: purchase date and cost, model and serial numbers, nozzle and sprinkler package charts, pump curves, inspection and repair history, parts replaced, flow and pressure readings and energy use. Good records help you plan replacements, prove performance and support warranty or insurance claims.
When to ask for help
Electrical, well, backflow and chemigation rules vary by state and utility. Talk with the equipment manufacturer or dealer, your extension irrigation specialist, your NRCS or conservation district office, a licensed electrician and your electric utility before you install, modify or repair major equipment. The state directory lists agencies and resources in every state.
Frequently asked questions
When should I do the inspection?
Before the first irrigation of the season, with time left to order parts. A short midseason check catches faults that develop under load.
Why record measurements?
Numbers such as pressure and circle time reveal slow changes that eyes miss. Comparing years shows wear before it becomes failure.
Who should do it?
Anyone trained on the machine can do the walk-around. Electrical and structural repairs belong to qualified technicians.
Related guides
- How a Center Pivot Works
- Pivot Sprinkler Package Basics
- Pivot Nozzle and Uniformity Check
- Linear Move vs Center Pivot
- Drip Irrigation System Basics
- Drip Tape vs Drip Line
More from the network
Farm news, humor and ranch life at farm.FM.