Irrigation Parts and Spares List
A spares list names the parts you keep on the shelf so a failure does not stop irrigation. It ranks parts by how critical they are, how long they take to arrive and how often they fail.
Why it matters
A missing five dollar part can idle an entire field for days in peak season. Stocking the right few items, and only those, prevents downtime without tying up money in parts you will never use.
Step by step
- List every part that has failed before, plus wear items such as seals, belts, nozzles, gaskets, fuses and solenoids.
- Rate each part on three scales: damage if it fails, replacement lead time, and how often it fails.
- Stock parts that rate high on criticality and lead time, and low-cost wear items in a percentage of installed count.
- Label a shelf or box, note part numbers from your manuals, and store them clean, dry and easy to find.
- Review after every season, add parts that failed, remove ones that never did, and reorder anything you used.
What good looks like
A good spares list is short, targeted and current. When something fails, the part is on the shelf, labeled and ready, and the list shows quantities, location, supplier and the date of the last review.
Worked example
Illustrative stocking: a pivot has 150 sprinkler nozzles. Keeping 3 percent spares means 150 times 0.03, or 4.5, so stock 5. A critical seal costing $85 that takes 10 days to arrive and would idle 80 acres is worth a spare, because 10 days of lost irrigation costs far more than $85 sitting on a shelf. Percentages are illustrative; adjust to your own failure history.
Common mistakes to avoid
- Stocking cheap items in bulk but missing the one critical, slow part.
- Keeping parts in loose boxes without labels, so no one can find them.
- Buying spares for equipment you plan to replace within a season.
- Never updating the list after failures, so the shelf stays out of date.
Safety, legal and compliance notes
Use only correct, compatible replacement parts, and have a qualified professional install anything affecting pressure, electrical safety or backflow protection. Check local rules before storing fuel or lubricants with your spares.
What to record
Keep a dated equipment file: purchase date and cost, model and serial numbers, nozzle and sprinkler package charts, pump curves, inspection and repair history, parts replaced, flow and pressure readings and energy use. Good records help you plan replacements, prove performance and support warranty or insurance claims.
When to ask for help
Electrical, well, backflow and chemigation rules vary by state and utility. Talk with the equipment manufacturer or dealer, your extension irrigation specialist, your NRCS or conservation district office, a licensed electrician and your electric utility before you install, modify or repair major equipment. The state directory lists agencies and resources in every state.
Frequently asked questions
How many spares should I carry?
Carry enough to cover the realistic failures between ordering and delivery. Critical single points of failure get one spare; common wear items get a small percentage.
Where should I store spare parts?
Keep them in a clean, dry, labeled, rodent-proof space near the equipment. Protect rubber and electronic parts from heat, sunlight and moisture.
Is it worth keeping a spare pump?
It depends on lead time and crop value. If a failure would cost a crop and replacement takes weeks, a spare or quick access to one can pay off.
Related guides
- Irrigation Maintenance Calendar
- Winterizing Irrigation Equipment
- Spring Startup Checklist for Irrigation
- Finding and Fixing System Leaks
- Choosing an Irrigation System
- Irrigation System Cost Comparison Worksheet
More from the network
Farm news, humor and ranch life at farm.FM.