Irrigation Equipment Directory

Choosing an Irrigation System

Choosing a system starts with numbers, not sales talk. Work out the flow your crop needs at peak use, then test each option against your water, power, labor and field shape.

Why it matters

A system that fits the brochure but not your field wastes money for decades. Undersized flow leaves the crop short in July, while oversized equipment burns energy and capital. A short, written selection process keeps the decision grounded.

Step by step

  1. Record field acres, shape, slope and soil intake rate, and mark obstacles such as ditches, power lines and odd corners.
  2. Find peak daily crop water use for your crop in inches per day from local extension guidance.
  3. Divide peak use by expected efficiency, then convert to the flow needed using 453 gpm per acre-inch per hour.
  4. List your water supply flow, pumping lift and power source, and drop any option that cannot be supplied.
  5. Score the remaining options on labor, energy, upkeep and crop fit, then visit growers who run each one.

What good looks like

A good choice delivers peak flow within your water supply, fits the field with few unirrigated corners, uses labor you actually have, and keeps energy and repair costs you have written down and accepted.

Worked example

Illustrative: 120 acres, peak use 0.30 inch per day, 20 pumping hours. At 85 percent efficiency gross need is 0.353 inch per day, or 42.4 acre-inches. Divided by 20 hours that is 2.12 acre-inches per hour, times 453 gives about 959 gpm. At 70 percent efficiency the need rises to about 1,165 gpm.

Common mistakes to avoid

  • Sizing flow to average use instead of the peak weeks of summer.
  • Ignoring pumping lift and pressure when comparing system energy costs.
  • Choosing by purchase price alone and skipping repair and labor estimates.
  • Forgetting that soil intake rate limits how fast water can be applied.

Safety, legal and compliance notes

Water rights, well permits and electrical work are regulated locally. Check with your state water agency or district before expanding acreage, and hire a licensed electrician for service upgrades.

What to record

Keep a dated equipment file: purchase date and cost, model and serial numbers, nozzle and sprinkler package charts, pump curves, inspection and repair history, parts replaced, flow and pressure readings and energy use. Good records help you plan replacements, prove performance and support warranty or insurance claims.

When to ask for help

Electrical, well, backflow and chemigation rules vary by state and utility. Talk with the equipment manufacturer or dealer, your extension irrigation specialist, your NRCS or conservation district office, a licensed electrician and your electric utility before you install, modify or repair major equipment. The state directory lists agencies and resources in every state.

Frequently asked questions

What is the first number I need?

Peak crop water use in inches per day for your crop and climate. Local extension offices publish typical values, and every flow calculation builds on it.

Is drip always the most efficient choice?

Well managed drip usually has the highest efficiency, but it needs clean water, filtration and careful upkeep. Efficiency only helps if the system is run and maintained properly.

Should I size for average or peak use?

Size for peak use. Average use hides the hot, dry stretches when the crop is most sensitive and the system must run nearly nonstop.

Related guides

More from the network

Farm news, humor and ranch life at farm.FM.