Irrigation Terms Explained
Quotes and manuals use a short list of terms again and again. Learn these few and their conversions, and you can read a pump curve, size a system and spot errors.
Why it matters
Irrigation mixes flow, pressure and depth units, and mixing them up leads to wrong pump choices and wrong application depths. A short glossary with conversions lets you check a dealer's numbers yourself.
Step by step
- Learn flow units: gpm is gallons per minute, and one acre-inch is about 27,154 gallons of water.
- Learn pressure units: psi is pounds per square inch, and one psi equals about 2.31 feet of head.
- Learn depth terms: application depth is inches over the field, and efficiency is the share reaching the root zone.
- Learn soil terms: field capacity is full after drainage, and allowed depletion is how much the crop may use.
- Write the conversions on a card kept in the pickup, and check each quote's units before comparing.
What good looks like
A good grasp means you can convert between gpm, acre-inches and hours without help, translate psi to feet of head, and explain each line of a pump quote to someone else.
Worked example
Illustrative: a pump delivers 900 gpm for 10 hours. Gallons are 900 times 60 times 10, or 540,000. Divided by 27,154 that is about 19.9 acre-inches. Over 40 acres that is about 0.50 inch. Separately, 50 psi is 50 times 2.31, or 115.5 feet of head.
Common mistakes to avoid
- Mixing gallons per minute with gallons per hour in one calculation.
- Treating psi and feet of head as the same unit.
- Quoting efficiency without saying whether it means pump, system or application.
- Forgetting that acre-inches describe volume, while inches describe depth.
Safety, legal and compliance notes
Equipment ratings and pressure limits are set by manufacturers and safety codes. Confirm limits with a qualified irrigation dealer or engineer before changing pressure, and never exceed rated working pressure.
What to record
Keep a dated equipment file: purchase date and cost, model and serial numbers, nozzle and sprinkler package charts, pump curves, inspection and repair history, parts replaced, flow and pressure readings and energy use. Good records help you plan replacements, prove performance and support warranty or insurance claims.
When to ask for help
Electrical, well, backflow and chemigation rules vary by state and utility. Talk with the equipment manufacturer or dealer, your extension irrigation specialist, your NRCS or conservation district office, a licensed electrician and your electric utility before you install, modify or repair major equipment. The state directory lists agencies and resources in every state.
Frequently asked questions
What is head in irrigation?
Head is pressure expressed as the height of a water column in feet. It lets you add lift, friction and pressure on one scale.
How many gallons are in an acre-inch?
About 27,154 gallons. It is the volume that covers one acre one inch deep, and it links gpm to field depth.
What does efficiency mean here?
Efficiency is the share of pumped water that ends up in the root zone, usually stated as a percent for the whole system.
Related guides
- Choosing an Irrigation System
- Irrigation System Cost Comparison Worksheet
- Matching Equipment to Crop and Soil
- Irrigation Equipment Buying Checklist
- How a Center Pivot Works
- Pivot Sprinkler Package Basics
More from the network
Farm news, humor and ranch life at farm.FM.